5Touch [SAVE].

The [TITLE] indicator appears. When you press START/STOP to start recording, the [TITLE SAVE] indicator is displayed on the screen for about 5 seconds, and the title is set.

To superimpose a title on the recorded tape

The title is recorded for about 5 seconds after recording starts.

Make sure the POWER switch is set to PLAY/EDIT mode.

1Select the position at which you want to superimpose the title.

1 Touch [INPUT TITLE].

2 Select the direction in which to scan with / .

3 Touch the thumbnail on which you want to superimpose the title, and touch [EXEC] or touch the thumbnail again.

2Follow steps 1 to 4 in “To superimpose a title on the tape when you start recording”.

3Touch [SAVE].

The [TITLE SAVE] indicator is displayed on the screen for about 5 seconds, and the title is set. Then, the screen returns to the thumbnail index screen.

bNotes

•The point you superimposed the title may be detected as an index signal when searching a recording with other video device.

•In the default setting, when you leave your camcorder without performing any operations for about 5 minutes after you turn on your camcorder, the power automatically goes off. If

you take 5 minutes or longer to enter characters, you can keep the power on by setting

[A.SHUT OFF] to [NEVER] in the (STANDARD SET) menu (p. 70). Even though the power goes off, the characters you have entered remain stored in memory. Turn the power back on, then start again from step 1 to continue superimposing the title.

zTips

•To change a created title, select the title in step 1 in “To superimpose a title on the tape

when you start recording”. Then touch and reselect the characters again.

•You can create an original title by touching [TITLE SET] with the POWER switch set to PLAY/EDIT mode before step 1 in “To superimpose a title on the recorded tape”.

TITL ERASE

1Select the title that you want to erase using / , then touch .

2Confirm the title is the one you want to erase, then touch [YES]. To cancel the operation, touch [NO].

3Touch .

TITLE DISP

You can view the title when you playback the picture.

GON

Select to display the title when a scene superimposed with a title

 

appears.

 

 

OFF

Select when you do not want to display the title.

 

 

 

,continued

Menu the Using

Using the Menu 65