Symptom | Cause and/or Corrective Actions |
| |
|
|
|
|
The remaining tape indicator is not | cSet [ REMAINING] to [ON] on the |
| (STANDARD SET) menu to |
displayed. | always display the remaining tape indicator. (p. 68) |
A cassette label is not recorded. cSlide the
LCD screen
Symptom | Cause and/or Corrective Actions |
|
|
Indicators or messages are displayed | cSet LANGUAGE to the desired language. (p. 20) |
in a language you do not understand. |
|
|
|
An unknown picture appears on the | • The camcorder is in DEMO MODE. (The DEMO MODE is |
screen. | automatically displayed when you leave the camcorder for 10 minutes |
| after setting the POWER switch to the |
| inserting a cassette or “Memory Stick Duo.”) Touch on the LCD screen |
| or insert a cassette or “Memory Stick Duo” to cancel DEMO MODE. |
| You can also set [DEMO MODE] to [OFF] on the menu. (p. 61) |
|
|
An unknown indicator appears on the | cRefer to the indication list. (p. 112) |
screen. |
|
|
|
The buttons do not appear on the | cTouch the LCD panel lightly. |
touch panel. | cPress DISPLAY/BATT INFO (or DISPLAY on the Remote |
| Commander). (p. 43) |
|
|
The buttons on the touch panel do not | cAdjust the screen (CALIBRATION). (p. 103) |
work correctly or do not work at all. |
|
|
|
Recording
If you are using a “Memory Stick Duo” for recording, refer also to the “Memory Stick Duo” section. (p. 88)
Symptom | Cause and/or Corrective Actions |
|
|
The tape does not start when you press START/STOP.
cSlide the POWER switch repeatedly to select the
cThe tape has reached the end. Rewind it, or insert a new cassette.
cSlide the
cThe tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then reinsert the cassette. (p. 102)
86Troubleshooting