Quick Start Guide
Recording movies on a tape
1 Attach the charged battery pack to the camcorder.
To charge the battery, see page 13.
aSlide the BATT (battery release) lever in the direction of the arrow as shown in the illustration and remove the battery terminal cover.
bAttach the battery pack with its terminal side facing your camcorder as shown in the illustration and press down the battery pack until it clicks.
BATT (battery release) lever
2 Insert a cassette into the camcorder.
aSlide the OPEN/EJECT lever in the direction of the arrow, then open the cassette lid.
The cassette compartment comes out automatically.
bInsert the cassette with the
cLightly push the cassette compartment in with the cassette lid.
Close the cassette lid after the cassette compartment slides back in by itself.
OPEN/EJECT lever | |
|
8Quick Start Guide