Printer unit control panel messages (continued)

Control panel message

Recommended action

 

 

 

 

 

 

FUSER LIFE LOW

Although printing can continue, the fuser

 

 

REPLACE KIT

should be replaced for optimum printer unit

 

 

 

operation.

 

 

 

 

 

 

FUSER LIFE OUT

Replace the fuser kit and reset the fuser

 

 

REPLACE KIT

counter before attempting to print.

 

 

 

 

 

 

INPUT DEVICE

Close the media transfer door.

 

 

PAPER PATH OPEN

 

 

 

 

 

 

 

INSTALL <COLOR> TONER

Insert the cartridge or make sure the installed

 

 

 

cartridge is fully seated in the printer unit.

 

 

 

 

 

 

INSTALL FUSER

Install the fuser and verify that it is properly

 

 

 

LOWER LEFT DOOR

seated in the printer unit before attempting to

 

 

 

print.

 

 

 

 

 

 

INSTALL IMAGING DRUM

Install the imaging drum before attempting to

 

 

OPEN FRONT DOOR

print.

 

Printing

 

 

 

INSTALLTRANSFER DRUM

Install the transfer drum before attempting to

 

OPEN RIGHT DOOR

print.

 

 

 

 

 

 

LOCK TONER LEVER

Open the front door of the printer unit, open

 

 

 

the clear door, swing the blue lever to the left

 

 

 

to lock it. Close the clear door and the front

 

 

 

door.

 

 

 

 

 

 

MANUALLY FEED

Load the correct type and size media into

 

 

<TYPE> <SIZE>

Tray 1.

 

 

 

 

 

 

OFFLINE

Press GO to bring the printer unit online.

 

 

 

 

 

 

POWERSAVE ON

Clear this message by pressing any key or by

 

 

 

sending a print job to the printer unit.

 

 

 

 

 

 

PROCESSING

No action is required.

 

 

COPY <X> OF <Y>

 

 

 

 

 

 

 

PROCESSING JOB

No action is required.

 

 

 

 

 

 

TONER LOW

Although printing can continue, the toner

 

 

REPLACE <COLOR>

cartridge should be replaced for optimum

 

 

 

printer unit operation.

 

 

 

 

 

 

EN

Common messages 29

Page 31
Image 31
HP 8000 s manual Fuser Life LOW