Sony DCR-SR65 Adjusting the LCD panel, Fastening the grip belt, Opening the Lens Cover manually

Step 4: Making setting adjustments before recording

Opening the LENS COVER manually

Slide the LENS COVER switch to open.

LENS COVER switch

Tips

When you finish recording or when you play back images, close the LENS COVER.

Notes

Do not press the buttons on the LCD frame accidentally when you open or adjust the LCD panel.

Tips

If you rotate the LCD panel 180 degrees, you can close the LCD panel with the LCD screen facing out. This is convenient during playback operations.

Touch (HOME)  (SETTINGS)  [SOUND/DISP SET]  [LCD BRIGHT] (p. 64), and adjust the brightness of the LCD screen.

The information is displayed or hidden (display  no display) each time you press DISP/

BATT INFO.

Getting Started

Adjusting the LCD panel

Open the LCD panel 90 degrees to the camcorder (), then rotate it to the best angle to record or play ().

90 degrees to the

90 degrees camcorder (max.)

Fastening the grip belt

Fasten the grip belt and hold your camcorder correctly.

180 degrees	DISP/BATT INFO
(max.)
To turn off the LCD	backlight to make the
battery last longer

Press and hold DISP/BATT INFO for a few seconds until appears.

This setting is practical when you use your camcorder in bright conditions or when you want to save battery power. The recorded image will not be affected by the setting. To turn on the LCD backlight, press and hold DISP/BATT INFO for a few seconds until disappears.

19