Touch [].

flashes quickly. When the white balance has been adjusted and stored in the memory, the indicator stops flashing.

Notes

Set [WHITE BAL.] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent lamps.

When you select [ONE PUSH], keep framing

white object while is flashing quickly.

flashes slowly if [ONE PUSH] could not be set.

When [ONE PUSH] was selected, if keeps flashing after touching , set [WHITE BAL.] to [AUTO].

When you set [WHITE BAL.], [SCENE SELECTION] is automatically set to [AUTO].

Tips

If you changed the battery pack, or moved your camcorder to or from outdoors when [AUTO] was selected, aim your camcorder at a nearby white object with [AUTO] for about 10 seconds for better color balance adjustment.

If you change the [SCENE SELECTION] settings or move your camcorder outdoors during white balance setting with [ONE PUSH], you need to repeat the [ONE PUSH] operation.

COLOR SLOW SHTR (Color Slow Shutter)

When you set [COLOR SLOW SHTR] to [ON], you can record an image brighter in color even in dark places.

appears on the screen.

To cancel [COLOR SLOW SHTR], touch [OFF].

Notes

Adjust the focus manually ([FOCUS], p. 71) when it is hard to focus automatically.

The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.

S. NIGHTSHOT PLS (Super

NightShot plus)

The image will be recorded at a maximum of 16 times the sensitivity of NightShot plus recording if you set [S. NIGHTSHOT PLS] to [ON] while the NIGHTSHOT PLUS switch (p. 28) is also set to ON.

appears on the screen.

To return to the normal setting, set [S. NIGHTSHOT PLS] to [OFF].

Notes

Do not use [S. NIGHTSHOT PLS] in bright

places. This may cause a malfunction.

Do not cover the infrared port with your fingers or other objects.

Remove the conversion lens (optional).

Adjust the focus manually ([FOCUS], p. 71) when it is hard to focus automatically.

The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.

FADER

You can record a transition with the following effects adding to the interval between scenes.

Select the desired effect in [STBY] (to fade in) or [REC] (to fade out) mode, then touch .

Press START/STOP.

The fader indicator stops flashing and disappears when the fade is complete.

To cancel the fader before starting the operation, touch [OFF] in step .

If you press START/STOP, the setting is canceled.

Fading out

Fading in

WHITE FADER

74

Page 74
Image 74
Sony DCR-SR65 manual Nightshot PLS Super NightShot plus, If you press START/STOP, the setting is canceled, White Fader