Sony DCR-SR65 manual Dubbing to other devices, Connecting with the A/V connecting cable

Dubbing to other devices

Connecting with the A/V connecting cable

You can dub images played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. Connect the device in either of the following ways. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 13). Refer also to the instruction manuals supplied with the devices to be connected.

Select beforehand the media which contains the image you want to dub (p. 20).

Notes

Since dubbing is performed via analog data transfer, the image quality may deteriorate.

DCR-SR45/SR46:

DCR-SR65/SR85:

A/V Remote Connector or A/V OUT jack

: Video/Signal flow

Device without an S VIDEO jack

(Yellow)

(White)

(Red)

Device with an

S VIDEO jack

(White)

(Red)

(Yellow)

VCRs or DVD/HDD recorders

A/V connecting cable (supplied)

The Handycam Station has an A/V OUT jack (DCR-SR65/SR85) (p. 99) and the camcorder has an A/V Remote Connector (p. 96). Connect the A/V connecting cable either to the Handycam Station or to your

46camcorder, according to your setup.

A/V connecting cable with S VIDEO (optional)

When connecting to another device via the S VIDEO jack, by using an A/V connecting cable with an S VIDEO cable (optional), higher quality images can be produced than with an A/V connecting cable. Connect the white