Sony DCR-SR65 manual Changing the language setting, To turn off the power

To turn off the power

Turn the POWER switch to OFF (CHG).

Notes

If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the built-in rechargeable battery and then set the date and time again (p. 94).

It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. You cannot operate your camcorder during this time.

In the default setting, the power turns off automatically if you leave your camcorder unoperated for approximately 5 minutes, to save battery power ([A.SHUT OFF], p. 67).

Tips

The date and time do not appear during recording, but they are automatically recorded on the media, and can be displayed during playback ([DATA CODE], p. 62).

Refer to page 88 for information concerning “World time difference.”

If the buttons on the touch panel do not work correctly, adjust the touch panel [CALIBRATION] (p. 93).

Changing the language setting

You can change the on-screen displays to show messages in a specified language. Touch (HOME)  (SETTINGS)  [CLOCK/LANG]  [LANGUAGE SET], then select the desired language.

18