Playing the image on a TV

Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable

or an A/V connecting cable with S VIDEO . Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 13). Refer also to the instruction manuals supplied with the devices to be connected.

DCR-SR45/SR46:

DCR-SR65/SR85:

A/V Remote Connector or A/V OUT jack

: Signal flow

Device without an S VIDEO jack

(Yellow)

(White)

(Red)

Device with an S VIDEO jack

(White)

(Red)

(Yellow)

VCRs or TVs

A/V connecting cable (supplied)

The Handycam Station has an A/V OUT jack (DCR-SR65/SR85) (p. 99) and the camcorder has an A/V Remote Connector (p. 96). Connect the A/V connecting cable either to the Handycam Station or to your camcorder, according to your setup.

A/V connecting cable with S VIDEO (optional)

When connecting to another device via the S VIDEO jack, by using an A/V connecting cable with an S VIDEO cable (optional), higher quality images

34can be produced than with an A/V

connecting cable. Connect the white and red plugs (left/right audio) and the S VIDEO plug (S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (optional). The yellow plug connection is not necessary. Connecting only the S VIDEO plug will not output audio.

Notes

Do not connect A/V connecting cables to both

your camcorder and the Handycam Station at the same time. The image might get disturbed (DCR-SR65/SR85).

Page 33 Page 35
Page 34
Image 34
Sony DCR-SR65 Playing the image on a TV,  A/V connecting cable supplied,  A/V connecting cable with S Video optional
Page 33 Page 35
Top Page Image Contents