Sony DCR-TRV130 Playing back a tape, (1), (2), (3), (4), (5), (6), [a], [b], [a], [b], To stop playback, — Playback – Basics —, When monitoring on the LCD screen

— Playback – Basics —

Playing back a tape

You cannot play back the tapes recorded in the Hi8	/Standard (analog) system.
Your camcorder plays back pictures only in the Digital8	system.

You can monitor the playback picture on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can control playback using the Remote Commander supplied with your camcorder.

(1) Install the power source and insert the recorded tape.

(2) Set the POWER switch to VCR while pressing the small green button.

(3) Open the LCD panel while pressing OPEN.

(4) Press mto rewind the tape.

(5) Press Nto start playback.

(6) To adjust the volume, press either of the two buttons on VOLUME. The speaker on your camcorder is silent when the LCD panel is closed.

4	5		2	POWER
REW		PLAY		VCR
				(
				OFF CHARGE
				)
				CAMERA

Basics – Playback

3	6
	VOLUME

1

To stop playback

Press x.

When monitoring on the LCD screen

You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out [a]. You can adjust the angle of the LCD panel by lifting the LCD panel up by 23 degrees [b].

[a] [b]

23° 27