— Editing —

Dubbing a tape

Using the A/V connecting cable

Connect your camcorder to the VCR using the A/V connecting cable supplied with yourcamcorder.

YoucanrecordandeditapicturewiththeconnectedVCRbyusingyourcamcorderas aplayer.

Set DISPLAY to LCD in in the menu settings. (The default setting is set to LCD.)

Make the indicators disappear by pressing DISPLAY, DATA CODE or SEARCH MODE ontheRemoteCommander.Ifyoudonotmaketheindicatorsdisappear,theyare recordedontapes.

(1)Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.

(2)Set the input selector on the VCR to LINE. Refer to the operating instructions of your VCR for more information.

(3)Set the POWER switch to VCR.

(4) Play back the recorded tape on your camcorder.

(5)Start recording on the VCR.

Refer to the operating instructions of your VCR for more information.

Editing

Yellow

White

S VIDEO OUT

IN

A / V OUT

S VIDEO

 

VIDEO

:Signalflow

AUDIO

Red

When you have finished dubbing a tape

Press xon both your camcorder and the VCR.

You can edit on VCRs that support the following systems:

 

8 mm,

 

Hi8,

VHS,

S-VHS,

VHSC,

S-VHSC, Betamax,

 

ED Betamax,

mini DV, DV or

Digital8

 

If your VCR is a monaural type

ConnecttheyellowplugoftheA/Vconnectingcabletothevideoinputjackandthe whiteortheredplugtotheaudioinputjackontheVCR.Whenthewhiteplugis connected,theleftchannelaudioisoutput,andwhentheredplugisconnected,the rightchannelaudioisoutput.

If your VCR has an S video jack

 

ConnectusinganSvideocable(optional)toobtainhigh-qualitypictures.

 

Withthisconnection,youdonotneedtoconnecttheyellow(video)plugoftheA/V

 

connectingcable.

 

ConnectanSvideocable(optional)totheSvideojacksofbothyourcamcorderandthe

63

VCR.