Recording a whole CD on an MD (continued)

Step 1: Preparing CD for recording

1 Press one of the CD 1 6– CD 3 6 buttons to open the disc tray and place a CD on the tray.

With the label side up

The disc tray closes when you press the CD 1 6– CD 3 6 button again.

2 Press the CD button to switch the function to CD.

3 Press DISC SKIP repeatedly to select the desired CD.

The selected CD 1 6– CD 3 6 indicator lights green.

4 Press CONTINUE repeatedly until “1 DISC” appears.

Step 2: Recording

5 Insert a recordable MD in the MD 1 slot.

Insert the MD securely so that it clicks into place. If no MD is inserted, the MD is automatically loaded after a while. If MDs are inserted in other slots, the MD you inserted in the MD 1 slot is automatically loaded after pressing the ENTER/YES button in step 8.

With the arrow pointing toward the deck

With the label side up and the shutter on the right

6 Press REC/CD-MD SYNC.

7 Turn MULTI JOG until “NORMAL ?” appears.

1NORMAL ?

1 DISC

1

2

3

SYNC

LEVEL SYNC

 

 

 

8 Press ENTER/YES.

“SYNC” starts flashing, then remains lit in the display. The MD deck stands by for recording and the CD pauses at the beginning.

1

 

 

CD1-1 0.00

 

 

 

1 DISC

1

2

3

SYNC

LEVEL SYNC

 

 

 

 

 

 

 

9 Make sure that “SYNC” stops flashing, then press (P.

Recording starts.

Both the CD player and the MD deck stop automatically when the recording is completed.

To stop recording, press p.

To cancel CD-MD Synchro

Recording

Press EDIT/NO at any point from step 6 to 9.

To stop CD-MD Synchro Recording

Press p.

If an MD is already loaded

Insert a recordable MD after removing the loaded MD following the procedure below.

1Press MD 6.

The MD is released and ejected.

2Pull the MD from the slot.

14