When recording is finished

Remove the MD. “TOC Write” flashes and the recorded contents are memorized on the MD.

While “TOC Write” is flashing

Do not move the unit or pull out the AC power cord to ensure complete recording. The deck updates the Table of Contents (TOC) while “TOC” is flashing.

Tip

If noise is heard while recording an AM (MW/LW, MW/SW) radio station, reorient the AM loop antenna to reduce the noise.

Note

If “MD Protected” appears, the MD is protected against erasure and cannot be recorded. Press MD 6to eject the MD, then slide the tab on the side of the MD to close the slot (see page 33).

Operations Basic

19