2 Press TUNER repeatedly until the band you want appears.

Each time you press the button, the band changes as follows:

North American model:

FM nAM

n

European model:

FM nMW nLW

n

Other models:

FM nMW nSW

n

3 Press AUTO.

4 Turn MULTI JOG.

The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. To stop tuning, press p.

Presetting the radio station

5 Press EDIT/NO, then turn MULTI JOG until “TUNER Memory ?” appears.

TUNER Mem ory?

AUTO

TUNED STEREO

6 Press ENTER/YES.

7 Turn MULTI JOG to select the desired preset number.

MemoryFM 1CH?

AUTO

TUNED STEREO

8 Press ENTER/YES.

The station is stored.

9 Repeat steps 2 through 8 to preset other stations.

To tune in a station with a weak signal

Press MANUAL in step 3, then turn MULTI JOG to tune in the station and continue from step 5.

To change the preset number

Start over from step 2.

To change the AM/MW tuning interval (except for European model)

The AM/MW tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM/MW tuning interval, tune in any AM/ MW station first, then turn off the power. While holding down the DIMMER button, turn the power back on. When you change the interval, all the AM/MW preset stations are erased. To reset the interval, repeat the same procedure.

Tips

The preset stations are retained for about a day if you disconnect the AC power cord or if a power failure occurs.

You can label the preset stations (see page 55).

7