Recording multiple CDs on MDs in sequence
— Seamless Recording
You can use this feature to record three CDs to MDs in sequence.
Example 1 | Example 2 |
| MD1 |
MD1
MD2
EDIT/NO 6 3 7 p
TAPE
5 4
1 Insert CDs.
2 Insert a recordable MD.
Recording starts from the MD in the MD 1 slot. Remove the MD you do not want to record on beforehand.
3 Press the CD button to switch the function to CD.
4 Press
5 Turn MULTI JOG until “SEAMLESS ?” appears.
1 2 3 SEAMLESS ?
ALL DISCS
1 | 2 | 3 | SYNC | |
|
|
|
6 Press ENTER/YES.
“SYNC” starts flashing, then remains lit in the display. The MD deck stands by for recording and the CD pauses at the beginning. If you use an MD with tracks already recorded on it, the MD deck automatically locates the end of the recording and starts the new recording from there.
1 2 CD1-1 0.00
ALL DISC
1 | 2 | 3 | SYNC | |
LEVEL SYNC | ||||
|
|
|
7 Make sure that “SYNC” stops flashing, then press (P.
CD starts playing and MD starts recording. If the MD in the MD 1 slot becomes full, the rest of the CD is recorded on the MD in the next slot number. Both the CD player and the MD deck stop automatically when the recording is completed.
To cancel recording
Press EDIT/NO at any point from step 3 to 5.
To stop recording
Press p.
When recording is finished
Remove the MD. “TOC Write” flashes and the recorded contents are memorized on the MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC power cord to ensure complete recording. The deck updates the Table of Contents (TOC) while “TOC” is flashing.
Notes
•The Disc Memo Copy function is not activated during Seamless Recording.
•If the MD in the MD 1 slot becomes full, the rest of the CD is recorded on the MD in the next slot number. Insert another recordable MD in the next slot and remove the MD you do not want to record on beforehand.
36