Troubleshooting (continued)

A code made up of three letters and message flash alternately.

•The Self-Diagnostic function is working. Solve the problem referring to the check list (page 65).

Speakers

Sound comes from one channel or the left and right volume are unbalanced.

•Check the speaker connections and speaker placement.

CD Player

The CD tray does not close.

•The CD is not placed properly.

The CD will not eject.

•The CD has tape, seals, or paste on it.

The CD will not play.

•The CD is dirty.

•The CD is inserted label side down. •Moisture condensation has built up.

Remove the CD and leave the system turned on for about an hour until the moisture evaporates.

Play does not start from the first track.

•The player is in program or shuffle mode. Press CONTINUE.

“OVER” is displayed.

•You have reached the end of the CD. Press 0 or turn MULTI JOG to return to the beginning of the CD.

The CD indicator lights up when no CDs are inserted in the disc tray.

•The CD indicator lights up when you turn on the system for the first time. It will go off after a while.

•Last time you used the system, you turned it off with the disc tray opened. It will go off after a while. If not, press CD 6several times to open and close the disc tray.

MD Deck

An partially inserted MD cannot be pulled out.

•The MD deck’s self-lock system has gripped the MD. Insert the MD completely, then press MD 6.

An MD cannot be inserted.

•Insert the MD with the label side up in the direction of the arrow.

The controls do not work.

•The MD is dirty or scratched. (“Disc Error” appears.) Replace the MD with a new one.

The MD will not play.

•Moisture condensation has built up. Remove the MD and leave the system turned on for several hours until the moisture evaporates.

•Insert the MD in the direction of the arrow.

•Nothing is recorded on the MD.

Recording is not possible.

•The MD is protected against erasure. (“MD Protected” appears.) Slide the tab to close the slot (see page 33).

•Connect the sound source properly. •A pre-recorded MD is in the deck.

Replace the disc with a recordable MD. •Replace the disc with a recordable MD

that has sufficient time remaining or erase unnecessary tracks.

•The AC power cord was unplugged or a power interruption occurred during recording. Start recording over from the beginning.

Recording cannot be made on all MDs during CD-MD Synchro Recording

•Either CD or MD is not inserted in the same disc number.

“OVER” is displayed.

•You have reached the end of the MD. Press 0or turn MULTI JOG to return to the beginning of the MD.

66