Labeling the preset stations (continued)

9 Repeat steps 6 through 8 to complete the name.

If you make a mistake, press CURSOR

Nor nuntil the character you want to change flashes, then repeat steps 6 through 8. To erase a character, press EDIT/NO. Each time you press the button, the character in the cursor position is erased. You cannot insert a character between previously input characters.

10 Press ENTER/YES to complete the labeling procedure.

The Station Name is stored in the system‘s memory.

To cancel labeling

Press PRESET.

To check the name while tuning

Press DISPLAY.

Each time you press the button, the display changes as follows:

nStation Name

µ

Frequency

µ

Clock

µ

Preset Equalizer menu

To erase the name

Repeat steps 1 through 5, then press EDIT/ NO repeatedly until all the letters are erased.

Using the Radio Data System (RDS)

(European model only)

What is the Radio Data System?

Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers a convenient RDS feature, locating a station by program type (PTY). RDS is available only on FM stations*.

Note

RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak.

*Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Receiving RDS broadcasts

Simply select a station from the FM band.

When you tune in a station that provides RDS services, the station name appears in the display.

To check the RDS information

Each time you press DISPLAY, the display changes as follows:

nStation name

µ

Frequency

µ

Program type

µ

Clock

µ

Preset Equalizer menu

56