Recording only the first track on each CD (continued)
5 Press ENTER/YES.
“SYNC” starts flashing, then remains lit in the display. The MD deck stands by for recording and the CD player pauses. If you use an MD with tracks already recorded on it, the MD deck automatically locates the end of the recording and starts the new recording from there.
1CD1-1 0.00
1 | 2 | 3 | SYNC | PROGRAM 3 |
LEVEL SYNC |
| |||
|
|
|
|
6 Make sure that “SYNC” stops flashing, then press (P.
CD starts playing and MD starts recording. Both the CD player and MD deck stop automatically when the recording is completed.
Recording from four or more CDs
Repeat steps 1 and 4 through 6.
To cancel recording
Press EDIT/NO in step 4.
To stop recording
Press p.
When recording is finished
Remove the MD. “TOC Write” flashes and the recorded contents are memorized on the MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC power cord to ensure complete recording. The deck updates the Table of Contents (TOC) while “TOC” is flashing.
Note
You can record only on the MD inserted in the MD 1 slot.
Recording the current CD track
— Rec It
You can select the CD track you want to record while listening, then start recording
immediately.
3
TAPE
4 p
1 Insert a CD.
2 Insert a recordable MD (see page
18).
You can record on any MDs inserted in MD 1 – 3 slots.
3 Press the CD button to switch the function to CD, then press MD/CD 1 – 3.
CD starts playing.
4 Press REC IT when you find the desired track.
The CD goes back to the beginning of the track, and recording starts. The MD deck stops automatically when the current track is finished.
To stop recording
Press p.
When recording is finished
Remove the MD. “TOC Write” flashes and the recorded contents are memorized on the MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC power cord to ensure complete recording. The deck updates the Table of Contents (TOC) while “TOC” is flashing.
40