Labeling an MD
— Name Function
You can create titles (names) for your recorded MDs and tracks. About 1,700 characters can be memorized for each MD.
4 | 5,10 2 | 6 3 |
|
| TAPE |
CURSOR N 4,7 8 DISC SKIP
1 Insert an MD you want to edit (see page 18).
2 Press the MD button to switch the function to MD.
3 Press pto stop playing.
Make sure that the total number of tracks and the playing time appear in the display, then go to the next step.
To label a track, turn MULTI JOG until the desired track number appears.
4 Press EDIT/NO, then turn MULTI JOG until “MD Name in ?” appears.
1 2 3 MD Name in ?
DISC
ALL DISCS
5 Press ENTER/YES.
The cursor starts flashing.
1 2 3 MD1
DISC
ALL DISCS
6 Press DISPLAY repeatedly until the type of character you want appears.
Each time you press the button, the display changes as follows:
A (Upper case) na (Lower case) n0 (Numbers) n! (Symbols)* n (Space)
nA…
*You can use the following symbols.
7 Turn MULTI JOG until the desired character appears.
To enter a blank space, go to the next step without turning MULTI JOG. A blank space cannot be entered in the first position.
8 Press CURSOR n.
The character you selected in step 7 stops flashing and the cursor shifts to the right.
1 2 3 MD1 | A |
DISC | DISCS |
ALL | |
| |
|
|
9 Repeat steps 6 through 8 to complete the entire title.
If you make a mistake, press CURSOR
Nor nuntil the character you want to change flashes, then repeat steps 6 through 8. To erase a character, press EDIT/NO. Each time you press the button, the character in the cursor position is erased. You cannot insert a character between previously input characters.
10 Press ENTER/YES to complete the labeling procedure.
The titles you labeled appear sequentially and the display returns to the original indication after a while.
46