
If print cartridge does not go in smoothly
Remove it fully from the unit and then reinsert it. If the cartridge does not go in smoothly because the ribbon is slack, rotate the spool of the cartridge in the direction shown by the arrow to take up the slack.
Caution
The interior of the unit can become hot. Do not put your fingers or other objects into the print cartridge slot.
3Loading the Print PaperThe print paper is supplied as part of the printing pack (page 6).
Mount it in the unit as shown below.
1Open the cover of the paper tray.
cover of the paper tray
2 | Place the print paper on the | Preparations |
|
tray.
Align the paper and place it on the tray with the protective sheet in place and facing up.
Protective sheet
You can insert up to 12 print papers (1 pack) at a time.
Note
Do not separate along the perforated lines before printing.
Continued