Sony DPP-MP1 21 GB, Printing, Print settings, Use the SELECT, Press the ENTER button, 3Press the ENTER button, 5Press the ENTER button, To change another setting

Print settings

You can select various settings for the image before printing.

1Hold down the ENTER button for at least 2 seconds.

The print settings mode is activated, and the indication “SHARP” flashes on the display.

2Use the SELECT (–/+) buttons until the desired setting item flashes on the display.

•Pressing SELECT (+) causes the display to cycle through available items in the order “SHARP” t“BRIGHT” t “DATE” t“FIT” t “MULTI” t“SHARP” etc.

•Pressing SELECT (–) cycles in the opposite direction.

The available settings are explained in the table “Print Setting Items” at the end of this section.

3Press the ENTER button.

The selected setting for the flashing item is shown.

4Use the SELECT (–/+) buttons to change the setting.

For example, if “DATE” is flashing, each push of the SELECT (–/+) button toggles between “ON” (date is printed) and “OFF” (date is not printed).

5Press the ENTER button.

•The print setting mode is terminated and the unit returns to the normal mode (print standby).

•The current print setting can be checked by the display indication.

DATE

To change another setting

Repeat this procedure from step 1.

Printing

Continued

21 GB