3Close the paper tray cover.

Note

If the print paper is not loaded properly, the paper tray cover cannot be closed. Make sure that the paper tray cover is completely closed.

4Pull out the protective sheet.

5Pull the paper tray door open, and insert the paper tray into the unit.

Push the paper tray all the way in, until it audibly snaps into place.

When printing is completed

Remove the paper tray from the unit and close the paper tray door.

Notes

The printing pack contains a print cartridge for 24 prints and 2 12-pack print paper.

Only load half of the print paper at one time.

When adding print paper to the paper tray, take care not to exceed the maximum of 12 sheets. Do not mix different types of print papers. Otherwise a paper jam can occur.

Do not write or print anything on the print paper before inserting it into this unit. After printing, if you wish to write onto the image side of the paper, use an oil-based marker. You cannot further print on the image side of the paper.

Do not attach any labels, stamps, stickers or similar to the print paper before printing.

When handling the print paper before printing, do not touch the image side (the side where nothing is printed). If there are fingerprints or dust on the print paper or the ribbon, print quality may be degraded.

Be sure to use only the dedicated print paper for this unit. Otherwise malfunction can occur.

Do not fold or crease the print paper. Otherwise malfunction can occur.

12 GB