4Inserting the “Memory Stick”
Insert a “Memory Stick” into the unit as shown below.
Be sure to push the “Memory Stick” all the way in, until it audibly snaps into place.
“Memory Stick”
MS ACCESS indicator
Insert with cutoff section facing left and arrow at top left.
To remove the “Memory Stick”
1Verify that the MS ACCESS indicator is out. Then push the “Memory Stick” fully into the unit.
When you let go, the “Memory Stick” will pop out slightly.
MS ACCESS indicator
2Pull out the “Memory Stick”.
Notes
• While the “Memory Stick” is being |
| |
accessed, the MS ACCESS indicator lights |
| |
up. Do not remove the “Memory Stick” |
| |
from the unit during this interval. |
| |
Otherwise the unit and/or the “Memory |
| |
Stick” may be damaged. |
| |
• Do not forcibly push or remove the |
| |
“Memory Stick” into or from the unit. |
| |
Preparations | ||
Otherwise the unit and/or the “Memory | ||
| ||
Stick” may be damaged. |
| |
• While printing is in progress, do not |
| |
remove the “Memory Stick” from the unit. |
| |
Otherwise the unit and/or the “Memory |
| |
Stick” may be damaged. |
| |
• The maximum Memory Stick capacity |
| |
with which this unit is compatible is 128 |
| |
MB. |
| |
• For information and precautions regarding |
| |
the handling of the “Memory Stick”, see |
| |
the section “Memory Stick” on page 27. |
|