Getting started

Charging the battery pack

1

2

Battery eject lever

AC power adaptor

USB cradle

3

DC plug

 

started Getting

, Open the battery/“Memory

Stick” cover.

Slide the cover in the direction of the arrow.

•When charging the battery pack, make sure the camera is not turned on (page 16).

•The camera operates only with the “InfoLITHIUM” battery NP-FC10 battery pack (C type) (supplied). You cannot use any other battery pack (page 105).

,Insert the battery pack, and close the cover.

Insert the battery pack with the v mark facing toward the battery compartment as illustrated above. Make sure the battery pack is properly inserted, then close the cover.

•While pushing the battery eject lever down using the front edge of the battery pack, you can easily insert the battery pack.

,Connect the AC-LM5 AC power adaptor (supplied) to the DC IN connector of the USB cradle.

Connect the plug with the v mark facing up.

•Do not short the DC plug on the AC power adaptor with a piece of metal. This may cause a malfunction.

11