Removing the USB cable from your computer/removing the camera from the USB cradle/turning off the camera
For Windows 2000, Me, or XP users
1
on the task tray.
2Click 
(Sony DSC), then click [Stop].
3Confirm the device on the confirmation window, then click [OK].
4Click [OK].
This step is unnecessary for Windows XP users.
5Remove the USB cable from your computer, remove the camera from the USB cradle or turn off the camera.
For Windows 98 or 98SE users
Confirm that the access indicators on the LCD screen are turned white and carry out only Step 5 above.
Copying images using “Image Transfer”
– Windows 98/98SE/2000/Me
When you connect the camera to your computer, “Image Transfer” launches and the images are automatically copied to the computer. When copying is complete, “ImageMixer” automatically launches and images appears.
•Normally “Image Transfer” and “Date” folders are created inside the “My Documents” folder, and all of the image files recorded with the camera are copied into these folders.
•You can change the “Image Transfer” settings (page 78).
– Windows XP
Connect the camera and your computer with the USB cable and the USB cradle.
“Image Transfer” starts up automatically and the images are automatically copied to the computer.
Windows XP is set so that the OS AutoPlay Wizard activates.
If you want to cancel the setting, follow the procedure below.
aClick [Start], then click [My Computer].
b
cCancel the setting.
1Click [AutoPlay].
2Set [Content type] to [Pictures].
3Check [Select an action to perform]
under [Actions], select [Take no
action], then click [Apply].
4Set [Content type] to [Video files] and proceed step 3. Set [Content
type] to [Mixed content] and proceed step 3.
5Click [OK].
The [Properties] screen closes. The OS AutoPlay Wizard does not start up automatically even if the USB connection is made.
computer your on images Enjoying
77