Shooting still images

Inserting and removing a “Memory Stick”

1

,Open the battery/“Memory Stick” cover.

Slide the cover in the direction of the arrow.

Connector side

2

Label side

 

,Insert the “Memory Stick.”

Insert the “Memory Stick” all the way in until it clicks as shown in the illustration.

•Whenever you insert a “Memory Stick,” push it as far as it can go. If you do not insert it correctly, a proper recording or playback may not be carried out.

Access lamp

3

,Close the battery/“Memory Stick” cover.

To remove the “Memory Stick”

Open the battery/“Memory Stick” cover, then push the “Memory Stick” to pop it out.

•Whenever the Access lamp is lit, the camera is recording or reading out an image. Never remove the “Memory Stick” or turn off the power at this time. The data may be corrupted.

20