cMake sure the USB ON/OFF switch is set to “ON” and
connect the supplied USB cable to the 
(USB) jack of the USB cradle.
USB ON/OFF switch
USB cable
dConnect the USB cable to your computer.
•When using a desktop computer, connect the USB cable to the USB connector on the rear panel.
eInstall the camera to the USB cradle and turn on the camera.
•Make sure the camera is securely installed to the USB cradle.
•When using Windows XP, the AutoPlay wizard automatically appears on the desktop. Proceed to page 79.
USB MODE
NORMAL
Access indicators*
“USB MODE NORMAL” appears on the LCD screen of the camera. When a USB connection is established for the first time, your computer automatically runs the used program to recognize the camera. Wait for a while.
•If “USB MODE NORMAL” does not appear, confirm that [USB CONNECT] is set to [NORMAL] in the SET UP settings (page 102).
•During the USB connection, do not switch the USB ON/OFF switch or not remove the camera from the USB cradle. The data may be corrupted. When you cancel the USB connection, see “P To cancel the USB connection” (page 77).
*During communication, the access indicators turn red.
76