Charging the battery pack (continued)
The tables show approximate guidelines for the length of time the camera can be used when you shoot in Normal mode in an environment where the ambient temperature is 25°C (77°F), and the supplied battery pack is fully charged. The guidelines for the number of images that can be recorded or viewed allow for changing the “Memory Stick” as necessary. Actual results may differ slightly from these, depending on the conditions of use.
Shooting still images
In normal shooting1)
| ||
Image size | No. of | Battery life |
images | (min.) | |
2272×1704 | Approx. 170 | Approx. 85 |
1)Shooting at
10
Viewing still images2)
| ||
|
|
|
Image size | No. of | Battery life |
images | (min.) | |
|
|
|
2272×1704 | Approx. 3800 | Approx. 190 |
|
|
|
640×480 | Approx. 3800 | Approx. 190 |
|
|
|
2)Playing back images in order at about
Shooting movies3) | |
|
|
LCD screen ON | LCD screen OFF |
(min.) | (min.) |
|
|
Approx. 90 min | Approx. 120 min |
|
|
3)Continuous shooting with an image size of 160×112
•The battery life and the number of images recordable or playable are decreased under the following conditions:
–At low temperature.
–Using the flash.
–Turning on and off frequently.
–When [LCD BACKLIGHT] is set to [BRIGHT]
–When [POWER SAVE] is set to [OFF].
–Using the battery pack that was used repeatedly or the battery capacity decreases as time passed (page 102).
When the POWER SAVE function is activated, you can shoot for a longer period of time.
Set the MODE dial to SET UP, and set
[POWER SAVE] in (SETUP 1) to [ON]. The factory setting is [ON] (page 99).
•The [POWER SAVE] item is only shown when using the battery pack.
When the POWER SAVE function is activated
•The LCD screen will be darker than it is when [POWER SAVE] is set to [OFF]. You cannot change the settings for [LCD BACKLIGHT] at this time (page 99).
•When shooting sill images, the focus works only while the shutter button is pressed down halfway.