Copying images using “Image Transfer”
– Windows 98/98SE/2000/Me
Connect the camera and your computer with the USB multi connecting cable.
“Image Transfer” launches and the images are automatically copied to the computer.
•Normally “Image Transfer” and “Date” folders are created inside the “My Documents” folder, and all of the image files recorded with the camera are copied into these folders.
•You can change the “Image Transfer” settings (page 73).
•When “ImageMixer” (page 71) is installed, image copying is completed using “Image Transfer,” “ImageMixer” automatically launches and images appear.
– Windows XP
Connect the camera and your computer with the USB multi connecting cable.
“Image Transfer” starts up automatically and the images are automatically copied to the computer.
Windows XP is set so that the OS AutoPlay Wizard activates.
If you want to cancel the setting, follow the procedure below.
aClick [Start], then click [My Computer].
b
cCancel the setting.
1Click [AutoPlay].
2Set [Content type] to [Pictures].
3Check [Select an action to perform] under [Actions], select [Take no
action], then click [Apply].
4Set [Content type] to [Video files] and proceed step 3. Set [Content
type] to [Mixed content] and proceed step 3.
5Click [OK].
The [Properties] screen closes. The OS AutoPlay Wizard does not start up automatically even if the USB connection is made.
Changing “Image Transfer” settings
You can change “Image Transfer” settings.
When the “Image Transfer” starts, the below window appears.
When you select [Settings] from the above window, you can only change the [Basic] setting.
computer your on images Enjoying
73