(SETUP 1)
Item | Setting | Description |
LCD | BRIGHT/ | Selects the LCD brightness. This has no effect on the recorded images. |
BRIGHTNESS | xNORMAL/ DARK |
|
|
|
|
LCD BACKLIGHT | BRIGHT/ | Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and easy to |
| xNORMAL | see when using the camera outdoors or in other bright locations, but also uses up the battery charge |
|
| faster. Displayed only when you are using the camera with the battery pack. When [POWER SAVE] is |
|
| set to [ON], this item cannot be shown. |
|
|
|
BEEP | SHUTTER | – Turns on the shutter sound when you press the shutter button. |
| x ON | – Turns on the beep/shutter sound when you press the control button/ press the shutter button. |
| OFF | – Turns off the beep/shutter sound. |
|
|
|
POWER SAVE | x ON / OFF | Selects whether to use the POWER SAVE mode (page 10). Displayed only when you are using the |
|
| camera with the battery pack. |
|
|
|
(SETUP 2)
Item | Setting | Description |
FILE NUMBER | x SERIES | – Assigns numbers to files in sequence even if the “Memory Stick” is changed or the recording folder |
|
| is changed. |
| RESET | – Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording |
|
| folder contains a file, a number one higher than the largest number is assigned.) |
|
|
|
USB CONNECT | PTP/xNORMAL | Switches the USB mode (page 68). |
|
|
|
VIDEO OUT | NTSC | – Sets the video output signal to NTSC mode (e.g., Japan, USA). |
| PAL | – Sets the video output signal to PAL mode (e.g., Europe). |
|
|
|
LANGUAGE | — | Displays the menu items, warnings and messages in selected language. |
|
|
|
CLOCK SET | OK / CANCEL | Sets the date and time (page 14). |
|
|
|
information Additional
99