Getting started

Charging the battery pack

1

2

Battery eject lever

AC power adaptor

Multi connector

3

v mark

, Open the battery/“Memory

Stick” cover.

Slide the cover in the direction of the arrow.

•When charging the battery pack, make sure the camera is not turned on (page 12).

•The camera operates only with the “InfoLITHIUM” battery NP-FC11 battery pack (C type) (supplied). You cannot use any other battery pack (page 102).

,Insert the battery pack, and close the cover.

Insert the battery pack with the v mark facing toward the battery compartment as illustrated above. Make sure the battery pack is properly inserted, then close the cover.

•While pushing the battery eject lever down using the front edge of the battery pack, you can easily insert the battery pack.

,Connect the AC-LM5 AC power adaptor (supplied) to the multi connector of the camera.

When placing the camera, make sure the LCD screen is facing up.

•Do not short the DC plug on the AC power adaptor with a piece of metal. This may cause a malfunction.

8