Using an external power source
Using your camera abroad
AC power adaptor
Multi connector
1 | v mark |
,Connect the
When placing the camera, make sure the LCD screen is facing up.
•Remove the battery pack when using an external power source.
•Connect the AC power adaptor to an easily accessible wall outlet (wall socket) close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
2 To a wall outlet (wall socket)
| 1 |
2 | Power cord |
(mains lead) |
,Connect the power cord (mains lead) to the AC power adaptor and to a wall outlet (wall socket).
•When you have finished using the AC power adaptor, disconnect it from the multi connector of the camera.
•The set is not disconnected from the AC power source as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off.
Power sources
You can use your camera in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
•Do not use an electrical transformer (travel converter), as this may cause a malfunction.
started Getting
11