Using the AC Adaptor

Using your camera abroad

AC Adaptor

Multi connector

1

DC plug

,Connect the AC Adaptor (supplied) to the multi connector of the camera.

When placing the camera, make sure the LCD screen is facing up.

Connect the plug with the v mark facing up.

•Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

2 To wall outlet (wall socket)

1

Power cord

2

(mains lead)

 

,Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket).

•After using the AC Adaptor, disconnect it both from the multi connector of the camera and from a wall outlet (wall socket).

•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off.

Power sources

You can use your camera in any country or region with the AC Adaptor (supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].

AC-LM5/LM5A

•Do not use an electronic transformer (travel converter), as this may cause a malfunction.

started Getting

15