Sony DSC-T11 Double-click, To change the file name, — Windows 98/98SE/2000/Me, Changing “Image Transfer” settings, cRight-clickthe image, then click [Copy]

Changing “Image Transfer” settings

You can change “Image Transfer” settings. Right-click the “Image Transfer” icon on the tasktray, select [Open Settings]. The settings you can set are as follows: [Basic], [Copy], and [Delete].

Right-click here

When the “Image Transfer” starts, the below window appears.

When you select [Settings] from the above window, you can only change the [Basic] setting.

Copying images without using “Image Transfer”

— Windows 98/98SE/2000/Me

If you do not set to launch “Image Transfer” automatically, you can copy images as following procedure.

aDouble-click [My Computer], then double-click [Removable Disk].

The contents of the “Memory Stick Duo” inserted in your camera appear.

•This section describes an example of copying images to the “My Documents” folder.

•When the “Removable Disk” icon is not shown, see page 89.

•When using Windows XP, see page 89.

bDouble-click [DCIM], then double-click the folder which contains the desired images.

The folder opens.

cRight-click the image, then click [Copy].

dDouble-click the “My Documents” folder. Right-click the inside of the folder, then click [Paste].

The image files are copied to the “My Documents” folder.

When an image with the same file name exists in the copy destination folder

The overwrite confirmation message appears. When you overwrite the existing image with the new one, the original file data is deleted.

To change the file name

To copy an image file to the computer without overwriting, change the file name to the desired name. However, note that if you change the file name, you may not be able to play back that image with your camera. To play back images with the camera, perform the operation on page 92.

88