Sony DSC-T11 Printing images, Press MENU, bPress MENU, Mode switch:, cSelect (Print) with b/B, then press z, dSelect [This image] with v/V, then press z

When [USB Connect] is not set to [PictBridge] on the Setup screen

Even if you turn on the camera, you cannot use the PictBridge function.

Disconnect the USB cable from the USB cradle and set [USB Connect] to [PictBridge].

Printing images

Mode switch: / /

You can select the image and print it. Set up the camera following the procedure on page 70, and connect the printer.

Control button

MENU

Mode switch

•You cannot print movies.

•When you print an E-mail image, only the JPEG image that was recorded at the same time is printed.

•When an error notification is received from the

connected printer, the indicator flashes for approximately 5 seconds. Check the connected

printer.

In single-image mode

aDisplay the image you want to print with b/B.

bPress MENU.

The menu appears.

cSelect (Print) with b/B, then press z.dSelect [This image] with v/V, then press z.

The print setting screen appears.

5M

1012/9

Print

Index	Off
Date
	Off

Quantity 1

Exit OK

•Items that the printer does not support are not displayed.

eSelect [Quantity] with v/V, select the number of sheets with b/B.

You can select the number up to 20.

printer) (PictBridge printing image Still

71