Sony DSC-U40 Inserting and removing a “Memory Stick Duo”, Stick Duo” cover, Stick Duo” cover, , Open the battery/“Memory, , Close the battery/“Memory

s

Inserting and removing a “Memory Stick Duo”

1

Terminal side

2

3

Access lamp

images still Shooting

, Open the battery/“Memory

Stick Duo” cover.

Hold the camera with the battery/“Memory Stick Duo” cover up, then slide the cover in the direction of the arrow 1while pressing OPEN. The battery/“Memory Stick Duo” cover opens in the direction of the arrow 2.

•For details on the “Memory Stick Duo,” see page 83.

, Insert the “Memory Stick Duo.”

Holding the “Memory Stick Duo” as shown in the illustration, insert it all the way in until it clicks.

•When you insert the “Memory Stick Duo,” make sure it is facing in the correct direction, and push it all the way in so that it is securely seated in the connector. If the “Memory Stick Duo” is not inserted correctly, you may not be able to record or display images in the “Memory Stick Duo.” This may also damage the camera or the “Memory Stick Duo.”

•Be careful not to drop the batteries when opening or closing the battery/“Memory Stick Duo” cover.

, Close the battery/“Memory

Stick Duo” cover.

To remove a “Memory Stick Duo”

Open the battery/“Memory Stick Duo” cover, then push the “Memory Stick Duo” to pop it out.

•When the access lamp is lit up, it means that image data is being read or written. Never open the battery/“Memory Stick Duo” cover or turn off the power at this time, as the data may be damaged.

17