Copying images to your computer — For Macintosh users
OS: Mac OS 9.1, 9.2, or Mac OS X (v10.0/ v10.1/v10.2)
The above OS must be installed at the factory.
USB connector: Provided as standard
Display: 800 × 600 dots or more
•If you connect two or more USB equipment to a single computer at the same time, some equipment, including your camera, may not operate depending on the type of USB equipment.
•Operations are not guaranteed when using a USB hub.
•Operations are not guaranteed for all the recommended computer environments mentioned above.
There are two modes for a USB connection, [NORMAL] and [PTP]* modes. The factory setting is the [NORMAL] mode. This section describes the USB connection using the [NORMAL] mode.
When the camera is connected to your computer via a USB cable, the camera can draw its power from your computer (USB Bus Powered).
*Compatible only with Mac OS X. When connected to a computer, only the data in the folder selected by the camera is copied to the computer. To select a folder when the camera is connected to your computer, press MENU and perform the procedures to change a folder for playback.
Communication with your computerWhen your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time.
When a USB connector is not provided on your computer
When neither a USB connector nor a “Memory Stick” slot is provided, you can copy images using an additional device. See the Sony Website for details. http://www.sony.net/
64