SELFTIMER

2M

101

 

 

10

O N

 

 

O F F

 

 

3

EXEC/

 

,Select [ON] with the control button v, then press EXEC.

When you press MENU, the menu

disappears and the (self-timer) indicator appears on the LCD screen.

2M

101

 

10

Self-timer lamp

4

,Center the subject in the LCD screen and press the shutter button fully down.

The self-timer lamp flashes red and a continuous beep sounds. The image will be shot after approximately 10 seconds.

To cancel the self-timer in the middle of the operation

Close the lens cover or press POWER to turn off the power.

•If you press the shutter button while standing in front of the camera, the focus and the exposure may not be correctly set.

Selecting a flash mode

2M 101

10

,Set the mode switch to , and press the control button v () repeatedly to select a flash

mode.

Each time you press v (), the indicator changes as follows.

No indicator (Auto): Based on the lighting conditions, the camera will decide if there is enough light, and will use the flash accordingly.

(Red-eye reduction): Flash mode is set to Auto, and the red-eye reduction operates if the flash strobes.

(Forced flash): The flash strobes regardless of the surrounding brightness.

(No flash): The flash does not strobe.

images still Shooting

23