Recommended OS |
| Usable models |
Windows 95/98/CE |
| PC card type: Type II |
Mac OS 7.5 or later |
| Standard interface: PC Card ATA/ |
|
| True IDE |
Using the supplied accessories (USB cable)
You can send image data from your camera to an IBM PC/AT compatible PC or to a Macintosh on which the Mac OS is running, using the supplied USB cable and USB driver software.
Install the USB driver software (supplied) following the instructions below.
Personal computer
USB cable* (supplied)
to the USB jack*
to the USB connector
* These USB cable and jack are designed for this digital still camera only.
Digital still camera
For Windows 98 users
1Turn on the power of your personal computer on which the Windows 98 is running.
2Set the supplied
3Connect one end of the USB cable to the USB jack and the other end to the USB connector on your personal computer as illustrated.
4Insert “Memory Stick” into your camera, and connect the AC power adaptor/charger to your camera.
5Turn on the power of your camera, and make sure if the USB cable is connected to the USB jack on your camera.
“PC MODE USB” appears on the LCD screen, and your camera turns to standby for communication.