Using the Aperture Priority mode
1 Press PROGRAM AE repeatedly
to select
.
2 Press v of the control button. The menu bar appears on the LCD screen.
3 Select ”CAMERA” with the control button, then press it. The CAMERA menu appears on the screen.
4
5 Select the desired aperture value. You can select from the following 7 value: F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0.
For a smaller aperture, select a higher value.
PNote
You cannot select F2.8 while you set the zoom lever to “T” side.
Using the Shutter Priority mode
1 Press PROGRAM AE repeatedly to select
.
2 Press v of the control button. The menu bar appears on the LCD screen.
3 Select ”CAMERA” with the control button, then press it. The CAMERA menu appears on the screen.
4 Select “SHUTTER SPEED” with the control button, then press it.
5 Select the desired shutter speed. Note that the shutter speed is indicated as, for example, “100” for 1/100 shutter speed.
You can select from the following 12 speeds.
When you select “NTSC” in “VIDEO OUT” in the SET UP menu: 1/8, 1/15, 1/30,
1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725 When you select “PAL” in “VIDEO OUT” in the SET UP menu: 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600
For a faster shutter speed, select a larger value indicator.
To cancel PROGRAM AE
Press PROGRAM AE repeatedly until the indicator on the LCD screen goes out.
PNotes
•You can focus only on distance subjects in Landscape modes.
•In Panfocus mode, the zoom position and focus are fixed.
•When you record in the Twilight
+(plus) mode we recommend that you use a tripod to compensate for camera- shake.
•Set the flash mode to 
when you use flash in the following mode:
Twilight mode, Twilight + (plus) mode or Landscape mode.
•When you record in the Twilight
+(plus) mode, the picture may become coarse momentarily just before your camera focuses on a subject in the auto mode. This is not a malfunction.
recording of ways Various