Using the supplied accessories (PC serial cable)
You can send image data from your camera to an IBM PC/AT compatible PC (via the serial port), using the supplied PC serial cable and Sony PictureGear 3.2 Lite.
See page 72 for the operating environment of Sony PictureGear 3.2 Lite.
Personal computer
PC serial cable (supplied)
to the serial jack
to the serial port
Digital still camera
1Install the supplied application software, Sony PictureGear 3.2 Lite, into your personal computer.
For details, refer to the instruction manual of the Sony PictureGear 3.2 Lite. (page 68)
2Connect one end of the PC serial cable to the serial jack and the other end to the serial port on your personal computer as illustrated.
3Turn on the power of your camera, and make sure if the PC serial cable is connected to the serial jack on your camera. Set the MODE selector to PLAY.
“PC MODE SERIAL” appears on the LCD screen, and your camera turns to standby for communication.
4Operate the personal computer to receive and use image file from your camera.
For details on the operation of your personal computer, refer to the instruction manual of your personal computer and Sony PictureGear 3.2 Lite.