Browsing by Explorer Using the PC Card Adaptor or the
USB Cable
The image data in the “Memory Stick” is stored as shown in the figure below in a new drive (e.g. removable disk (D:)) by Explorer.
Example: When connected to the USB connector (Only folders for recording mode used when you record images are displayed.)
back Playing
Folder containing still image data
Folder containing
Folder containing moving image data
Folder containing voice memo audio data
Handling Data Using the PC Card Adaptor or the USB Cable
Example: When using Windows 98
Look at the above Explorer figure.
(In this example, the drive on which this unit is identified is drive (D:).)
•To capture still picture data on the personal computer from this unit:
1Open folder “100msdcf” in the “Dcim” folder in the (D:) drive. A list of still picture data is displayed.
2Select the desired still image data, and capture it to the desired drive or folder.
•To capture still picture data on this unit from the personal computer:
1Capture the desired still image data to the “100msdcf” folder in the “Dcim” folder.
If there is no “100msdcf” folder, create a new folder called “100msdcf” using alphanumeric characters, and place this folder into the “Dcim” folder in the (D:)
drive.
2Give the desired still image data the file name “DSC0ssss.jpg”, and save the file to the “100msdcf” folder.
Enter a number within the range 0001 to 9999 in ssss. Prevent file names from being duplicated.