LCD screen (18, 22)
LCD BACK LIGHT switch
Normally set to ON.
Set to OFF to save the battery if you use your camera in bright place.
LCD BRIGHT +/– buttons Press to adjust the brightness of the LCD screen. The brightness of the LCD screen does not affect images you record on “Memory Stick”.
(Flash) button (33)/Flash lamp (33) AUTO (no indication) is set at the factory.
Each time you press the button, the flash mode changes as follows:
AUTO (no indication) t forced-
flash 
t no flash 
t AUTO. To change the flash mode, slide OPEN (FLASH) to lift the flash up. In AUTO mode, flashes automatically according to the brightness of the surroundings. The subject must be 11 7/8 inches to 8 1/3 feet (0.3 m to 2.5 m) away.
POWER switch/
POWER lamp (14)
PROGRAM AE button (36)
Zoom lever (19)
OPEN (battery/ “Memory Stick”) switch (11)
Slot cover for AC power adaptor/ charger (57)
Battery eject switch (11)
Access lamp (12)
A/V OUT jack (57, 58)
Audio is monaural.
DISPLAY button
Press to display or turn off the indicators on the LCD screen.
Control button