6When this unit is recognized on the personal computer, the Add Hardware wizard in Windows 98 starts.

Follow the on-screen messages to specify the CD-ROM and install this unit´s USB driver. The Add Hardware wizard starts twice because two USB drivers are installed.

7Open “My computer” and double click the driver newly set up.

For the detailed folder and file name, see 2 and 3 in “Using the Optional PC card adaptor for ‘Memory Stick’” (page 23).

For Macintosh users

1Turn on the power of your personal computer on which the Mac OS is running.

2Set the supplied CD-ROM of the USB driver software into the CD- ROM drive.

3Double click the icon of the CD-ROM drive, and open the “Sony USB Driver” folder.

4Select “Sony USB Device Driver” and “Sony USB Shim”, then drag and drop them to the “System Folder”. “These items need to be stored in the Extensions folder in order to be available to the computer. Put these items into the Extensions folder?” appears on the display. Click “OK”.

5Restart your personal computer.

6Insert “Memory Stick” into your camera, and connect the AC power adaptor/charger to your camera.

7Connect one end of the USB cable to the USB jack and the other end to the USB connector on your personal computer as illustrated.

8Turn on the power of your camera, and make sure if the USB cable is connected to the USB jack on your camera.

“PC MODE USB” appears on the LCD screen, and your camera turns to standby for communication.

back Playing

Recommended Windows

Recommended

environment

Macintosh environment

•OS: Microsoft Windows 98 standard installation

Operation in an environment upgraded to Windows 98 is not assured.

•CPU: MMX Pentium 200MHz or faster

The USB connectors must be provided as standard.

•OS: Mac OS system 8.5/8.6 standard installation

•Model: iMac/G3

The USB connectors must be provided as standard.

25-GB