zHint
If a message box appears indicating a communications problem, refer to steps 6 and 7 of Connections and Settings, and perform the following steps:
•Decrease the baud rate.
•Confirm that the port settings are correct.
PNote
If an image has been read and any of the following actions taken, repeat the procedure from step 1.
–The digital still camera has been turned off and back on.
–The cable has been disconnected.
–Any new image has been taken, or an image deleted with the digital camera.
–The “Memory Stick” was removed from the camera (for devices that include a “Memory Stick”).
PNote
•After working with an image after viewing the List View, such as
•As the digital still camera and PC are busy communicating until all image are read, do not disconnect the cable during this period.
Storing Images
Please see page 91.
Lite 2.3 PictureGear