Trouble check
Operation
Symptom | Cause and/or corrective actions |
The end search function does not work correctly.
• The tape has a blank portion in the middle.
The tape does not move when a tape transport button is pressed.
•The POWER switch is not set to VTR. m Set it to VTR. (p. 23)
•The tape has run out.
m Rewind the tape or use a new one. (p. 23)
No sound or only a low sound is heard when playing back a tape.
•The volume is turned to the minimum.
m Open the LCD panel and press VOLUME +. (p. 23)
•AUDIO MIX is set to ST2 side in the menu system. m Adjust AUDIO MIX in the menu system. (p. 89)
The new sound added to the recorded | • | AUDIO MIX is set to ST1 side in the menu system. | |
tape is not heard. |
| m | Adjust AUDIO MIX in the menu system. (p. 89) |
|
|
| |
The Steady Shot function does not work. | • | STEADYSHOT is set to OFF in the menu system. | |
|
| m | Set it to ON. (p. 51) |
The autofocus function does not work.
•Focus is set to the manual mode. m Set it to autofocus. (p. 58)
•Shooting conditions are not suitable for autofocus.
m Set focus to manual mode to focus manually. (p. 58)
The title is not displayed.
•TITLE DSPL is set to OFF in the menu system. m Set it to ON in the menu system. (p. 31)
The title is not recorded.
•The tape has no cassette memory.
m Use a tape with cassette memory. (p. 65)
•The cassette memory is full. m Erase another title. (p. 67)
•The tape is set to prevent accidental erasure.
m Slide the protect tab so that red portion is not visible. (p. 12)
•Nothing is recorded in that position on the tape.
m Superimpose the title to the recorded position. (p. 65)
The cassette label is not recorded.
•The tape has no cassette memory.
m Use a tape with cassette memory. (p. 70)
•The cassette memory is full. m Erase some titles. (p. 67)
•The tape is set to prevent accidental erasure.
m Slide the protect tab so that red portion is not visible. (p. 12)
Displaying the recorded date, date search function does not work.
• The tape has no cassette memory.
mUse a tape with cassette memory. (p. 75)
•CM SEARCH is set to OFF in the menu system.
mSet it to ON. (p. 75)
130