Attaching the supplied wide conversion lens

Hold the camcorder with its lens pointing upward. Align the groove on the wide conversion lens with the protruding part on the camcorder lens, then turn the ring in the direction of the arrow.

Attaching the wide conversion lens hood

Align the protruding part on the wide conversion lens hood with the groove on the wide conversion lens, then turn the ring in the direction of the arrow.

 

Note on the wide conversion lens

 

When the wide conversion lens is attached to the camcorder, the Steady Shot function may

 

not be fully effective.

 

To attach the wide conversion lens securely

 

Turn the ring of the lens while lightly pressing the wide conversion lens down on the

 

camcorder.

 

Note on the wide conversion lens hood

 

When the hood is attached to the wide conversion lens, you cannot attach a filter, etc. If you

 

need to use a filter, detach the hood before attaching the filter.

 

Note on the video flash light

64

When you use the HVL-FDH2 video flash light (not supplied) with the supplied wide

conversion lens attached, the flash light will be partially eclipsed by the lens.