Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to your recorded tape by specifying the starting and ending points. The original sound will not be erased.
You can only operate with the Remote Commander.
Connecting the microphone with the MIC jack
operations Advanced
MIC (PLUG IN POWER)
Ç: Signal flow | Microphone |
| (not supplied) |
|
Note
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or headphones.
Connecting the microphone with the intelligent accessory shoe
using the XLR adaptor
Connection is the same as shown in page 63.
Microphone (not supplied)
XLR adaptor
Note
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or headphones.
87