Trouble check
Others
Symptom | Cause and/or corrective actions |
No function works though the power is on.
•Disconnect the power cord (mains lead) of the AC power adaptor or remove the battery pack, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, open the LCD panel and press the RESET button beside the speaker using a
DV | • The input selector on the VCR is not set correctly. |
| m Set the selector to DV input position. If you use |
| another DVCAM camcorder, set the power switch to |
| VTR. |
| • The camcorder is connected to DVCAM equipment of |
| other than Sony. |
| m Operate normal editing. |
| • Setting program on a blank portion of the tape is |
| attempted. |
| m Set the program again on a recorded portion. |
|
|
information Additional
133