Using the memory card slot – introduction

When the PC card adaptor or PC card does not come out

Remove the battery before ejecting the PC card adaptor/PC card.

Connecting the PC card/parallel port adaptor (not supplied) with

your computer

To display images recorded on the “Memory Stick” or PC card on the computer monitor, connect the PC card/parallel port adaptor with your computer.

Turn off your computer, and then connect the PC card/parallel port adaptor (not supplied) with your computer as illustrated below.

Install the MSAC-PR1 device driver into your computer from CD-ROM supplied with the MSAC-PR1. For details, refer to “READ ME” on the CD-ROM.

 

Computer

 

to D-sub

Printer cable

25-pin

connector

 

to keyboard

 

connector

Keyboard

Power/access lamp

DC jack

Adaptor connector

To eject the PC card/PC card adaptor

Press the eject button.

Notes on the connection

•Select the one from the two DIN connectors that matches the keyboard connector of the computer, and use this connector to connect the computer.

•When connecting the PC card/parallel port adaptor (not supplied) and the keyboard, make sure sizes of the DIN connector of the keyboard and power cord match, then use the adaptor connector to connect.

•For notebook computers, there is no need to connect the keyboard.

Note on the power/access lamp

Do not insert/remove the PC card adaptor or “Memory Stick” when the power/access lamp is flashing; otherwise data on the “Memory Stick” or PC card may become damaged.

operations slot card Memory

93